Meyer Sound UPM-2P Self-Powered Loudspeaker

The Meyer Sound UPM-2P is a remarkably compact, self-powered professional sound reinforcement loudspeaker system. It is ideally suited to applications requiring a relatively small and inconspicuous loudspeaker that can also provide high sound pressure levels, extremely low distortion, and uniform directional control.

Features:

• Exceptional fidelity and power capability in an ultra-compact package
• Narrow, symmetrical pattern provides precise coverage control
• Unique crossover design eliminates combing for consistent midrange response
• Metal dome driver delivers exceptionally smooth high-frequency characteristic

Specifications:

• Acoustical
  • Operating Frequency Range: 80 Hz - 20 kHz
  • Frequency Response: 85 Hz - 19 kHz ±4 dB
  • Phase Response: 300 Hz - 18 kHz ±60°
  • Maximum Peak SPL: 123 dB
  • Dynamic Range: >110 dB
• Coverage
  • Horizontal: 45°
  • Vertical: 45°
• Crossover
  • 2300 Hz
• Transducers
  • Low Frequency:
    • Two 5" cone drivers
    • Nominal impedance: 8 Ω
    • Voice coil size: 1"
    • Power-handling capability: 200 W (AES)
  • High Frequency:
    • One 1" metal dome tweeter
    • Nominal impedance: 8 Ω
    • Voice coil size: 1"
    • Diaphragm size: 1"
    • Power-handling capability: 20 W (AES)
• Audio Input
  • Type: Differential, electronically balanced
  • Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
  • Connectors: Female XLR input with male XLR loop output
  • Input Impedance: 10 kΩ differential between pins 2 and 3
  • Wiring:
    • Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
    • Pin 2: Signal +
    • Pin 3: Signal - (optional polarity reversal switch)
    • Case: Earth ground and chassis
  • DC Blocking: Differential DC blocking up to maximum common mode voltage
  • CMRR: >50 dB, typically 80 dB (50 Hz – 500 Hz)
  • RF Filter: Common mode: 425 kHz; Differential mode: 142 kHz
  • TIM Filter: <80 kHz, integral to signal processing
  • Nominal Input Sensitivity: 0 dBV (1 V rms, 1.4 V pk) continuous average is typically the onset of limiting for pink noise and music
  • Input Level: Audio source must be capable of producing a minimum of +20 dBV (10 V rms, 14 V pk) into 600 Ω to produce maximum peak SPL over the operating bandwidth of the loudspeaker
• Amplifiers
  • Type: Complementary MOSFET output stages (class AB/bridged)
  • Output Power: 350 W total
  • THD, IM, TIM: <.02 %
  • Load Capacity: 4 Ω low channel, 8 Ω high channel
  • Cooling: Convection
• AC Power
  • Connector: PowerCon with looping output
  • Voltage Selection: External 115/230 V AC switch (100 V AC version available)
  • Operating Voltage Ranges: 105 V AC - 130 V AC (115 V AC); 210 V AC - 260 V AC (230 V AC)
  • Current Draw:
    • Idle Current: 0.13 A rms (115 V AC); 0.065 A rms (230 V AC); 0.15 A rms (100 V AC)
    • Max Long-Term Continuous Current (>10 sec): 1 A rms (115 V AC); 0.5 A rms (230 V AC); 1.2 A rms (100 V AC)
    • Burst Current (<1 sec): 1.3 A rms (115 V AC); 0.65 A rms (230 V AC); 1.5 A rms (100 V AC)
    • Ultimate Short-Term Peak Current Draw: 2.9 A pk (115 V AC); 2 A pk (230 V AC); 3.3 A pk (100 V AC)
    • Inrush Current: 18 A pk (115 V AC); 12 A pk (230 V AC); 15 A pk (100 V AC)
• RMS Network (Optional)
  • Equipped for two-conductor twisted-pair network, reporting all amplifier operating parameters to system operator’s host computer.
• Physical
  • Dimensions:
    • 6.85" w x 18.00" h x 7.70" d
    • (174 mm x 457 mm x 196 mm)
  • Weight: 21 lbs (9.53 kg)
  • Enclosure: Premium birch plywood
  • Finish: Black textured
  • Protective Grille: Powder-coated hex-stamped steel, foam covering
  • Rigging: Three 3/8"-16 or metric M10 nut plates